49
To remove the electronics bay
With the electronics bay open, pull it up and toward the front of the chassis, lifting it clear.
Installing the front subchassis and rear electronics bay
To install the front subchassis
1With the front subchassis tilted open about 30°, align the notch in the subchassis with the hinge pins on the main chassis.
2Lower the subchassis straight down until the hinge pins engage the notches.
3Connect all cables from the front subchassis to the power distribution board and to the mainboard.
To install the electronics bay
1With the electronics bay tilted open about 30°, align the pins on the electronics bay with the notches in the main chassis .
2Lower the electronics bay until the pins engage the notches and slide it back and down.
