135

To change the Supervisor/User password

1Use the up/down keys to highlight either set password parameters then press Enter.

2Type the original password then press Enter.

3Type a new password then press Enter.

4Retype the password to verify the first entry then press Enter again.

To remove the User/Supervisor password

1Use the up/down keys to highlight either set password parameters then press Enter.

2Enter the current password then press Enter.

3Press Enter twice without entering anything in the new and confirm password fields.

After doing this, the system automatically sets the corresponding password parameter to Clear.

Page 151
Image 151
Acer G901 manual To change the Supervisor/User password, To remove the User/Supervisor password, 135