
46 | 3 Hardware configuration |
To remove the front access panel
1Remove the rear access panel (refer to page 44).
2Release the two captive panel screws (Figure 13, A).
3Lift the rear edge of the panel slightly and slide it toward the rear of the chassis.
4Lift the panel up and off of the chassis.
Figure 13 - Removing the front access panel
To install the front access panel
Note: Before installing the front access panel, check that you have not left tools or loose parts inside the system.
1Position the panel on the chassis so that the panel tabs align with the chassis slots.
2While lightly pressing the panel against the chassis, slide it toward the front of the chassis until the panel tabs fully engage the chassis slots.
3Attach the panel to the chassis with the captive screws.
4Reinstall the rear access panel (refer to page 45).