
117
Parameter | Description | Option |
|
|
|
Type | Driver type | Auto |
|
| User |
|
| |
|
| |
|
| ATAPI |
|
| Removable |
Enhances disk performance depending on | |
Transfers | the hard disk in use. |
| If you set this parameter to Auto, BIOS |
| setup automatically detects if the |
| installed hard disk drive supports the |
| Block Mode function. If supported, it |
| allows data transfer in blocks (multiple |
| sectors) at a rate of 256 bytes per cycle. |
| If you set this parameter to Disabled, data |
| transfer from and to the device occurs |
| one sector at a time. |
Auto
Disabled
LBA Mode | Selects the hard disk drive translation | Auto |
Control | method. For drivers with more than | Disabled |
| 504 MB, the LBA mode is necessary. |
|
|
|
|
Enables or disables the | Disabled | |
| transfer function | Enabled |
Transfer Mode Selects the mode of transferring data to and from the attached drive. When drive type is Auto, this parameter only displays the mode supported by the drive and is therefore
Standard
FPIO1
FPIO2
FPIO3
FPIO4
FPIO 3/DMA1
FPIO 4/DMA2
Ultra DMA | Selects the Ultra DMA (Direct Memory | Disabled |
Mode | Access) mode. | Enabled |
|
|
|