Acer G901 manual To set up paging alerts, Maximum length for the string is five

176 Appendix B: System management

To set up paging alerts

To set up the server to send alerts as telephone pages:

1Install an external modem on the Emergency Management Port (COM2).

2From the SSU Main window, choose Platform Event Manager (PEM).

3In the PEM window, click Configure EMP.

4In the corresponding boxes, enter the following command strings for the modem attached to the EMP port:

•	ESC Sequence	The escape sequence. This string is sent to
		the modem before sending command strings.
		The maximum length for the string is five
		characters; longer strings are truncated.
•	Hangup String	The string to hang up or drop the
		connection. The EMP automatically sends an
		<ENTER> character following this string. The
		maximum length for the string is eight
		characters; longer strings are truncated.
•	Modem Dial	The command to dial a phone number. This
	Command	string is sent to the modem before sending
		the paging string.
•	Modem Init	The initialization string for the modem. This
	String	string is sent every time the EMP initializes.
		The maximum length for the string is
		determined at run-time from firmware. You
		will be notified if the string is truncated.
		Following a save, the actual string saved is
		displayed in the edit box.

5Click Save to save the changes.

6Click Close to return to the PEM window.

7In the PEM window, click Configure PEP.

8Select the Enable PEP check box.