Acer G901 manual To remove DIMMs, Installing a Dimm

61

4Orient the DIMM so that the notch in the bottom edge of the DIMM aligns with the keyed socket on the memory board.

5Insert the bottom edge of the DIMM into the socket and press down firmly on the DIMM until it seats correctly. The plastic ejector levers should snap into place when the DIMM is seated.

Figure 25 - Installing a DIMM

6Make sure that the plastic ejector levers on the socket ends are fully closed.

7Reinstall the memory board (refer to page 52).

To remove DIMMs

1Remove the memory board (refer to page 52). Place the board component-side up on a nonconductive, static-free surface.

2Locate the DIMM you want to remove and gently push down on the plastic ejector levers (Figure 26, A) to eject the DIMM from its socket.