209

The activity indicator doesn't light.

Make sure you've loaded the correct network drivers.

The network might be idle. Try accessing a server.

The onboard network interface controller (NIC) stopped working when an add-in adapter was installed.

Make sure the cable is connected to the port from the onboard NIC.

Make sure your PCI BIOS is current.

Make sure the other adapter supports shared interrupts. Also, make sure your operating system supports shared interrupts; OS/2 does not.

Try reseating the add-in adapter.

The add-in adapter stopped working without apparent cause.

Try reseating the adapter first; then try a different slot if necessary.

The network driver files might be corrupt or deleted. Delete and then reinstall the drivers.

Run the diagnostics.

PCI installation problems

Check the following:

Some drivers might require interrupts that are not shared with other PCI drivers. The SSU can be used to adjust the interrupt numbers for PCI devices. For certain drivers, it might be necessary to alter settings so that interrupts are not shared.

Check PCI interrupt interdependencies among slots and onboard devices.

Problems with application software

If you have problems with application software, do the following:

Verify that the software is properly configured for the system. See the software installation and operation documentation for instructions on setting up and using the software.

Page 225
Image 225
Acer G901 manual