DISASSEMBLY AND ASSEMBLY
Step 3: From the left side, remove the two CPB(O)(M4X8) screws securing the green and yellow earth cables between the bottom plate of the printer mechanism and the earth on the bottom panel assembly.
Step 4: Disconnect the 6 connectors, (1) through (6) as shown in Figure
4 
1 
E a r t h 5C2 a b6le3
E a r t h C a b le
1 F la t C a b le C o n n e c t o r ( 5 0 - p in
2 C N 4 ( 4 - p in ) :
3 C N 9 ( 7 - p in ) :
4 F la t C a b le C o n n e c t o r ( 5 0 - p in
5 C N 3 ( 2 - p in ) :
6 C N 5 ( 1 4 - p in ) :
Figure 3-24. Connector and Earth Cable Removal (left side)
Step 5: Open the rear cover. Remove the four CBB (M3x12) screws and two CB(M3x12) screws securing the interface cover and remove the cover.
Step 6: Remove the 2 CB(M3x12) screws securing the optional interface cover and remove the cover.
C B ( M 3 X 1 2 )
O p t io n a l
I n t e r f a c e C o v e r
I n t e r f a c e C o v e r
C B B ( M 3 X
R e a r C o v e r
Figure 3-25. Interface Cover Removal
|
|
|
Rev. B | ||
