Epson DFX-8500 service manual Plunger and Paper Bail Assembly Removal, Plunger Removal

DFX-8500

3.2.6.7 Plunger and Paper Bail Assembly Removal

This section describes how to remove the plunger (loading solenoid) and paper bail assembly.

Step 1: Disconnect the black, 2-pin plunger connector from the connector junction board assembly, and remove the plunger cable from the connector junction board assembly.

Step 2: Remove the two CP(S-P1) (M3x6) screws securing the plunger to the left side frame and remove the plunger.

Step 3: Remove the iron core of the plunger from the paper bail shaft.

I r o n C o r e

C P ( S - P 1 ) ( M 3 X 6 )

P l u n g e r

2 - p in B la c k

Figure 3-54. Plunger Removal

3-38 Rev. B