Epson DFX-8500 service manual Pull Tractor Sensor Removal, Pull Tractor Sensor removal

DISASSEMBLY AND ASSEMBLY

3.2.6.12 Pull Tractor Sensor Removal

Step 1: Remove the upper paper guide. (Refer to Section 3.2.6.8)

Step 2: Disconnect the red 2-pin pull tractor sensor connector from the connector junction board assembly.

Step 3: Remove the CP(S) (M2x14) screw securing the pull tractor sensor (a micro-switch type sensor) to the left side frame and remove the sensor.

C P ( S ) ( M 2 X 1 4 )

W a s h e r

P u ll T r a c t o r S

P la t e n H o ld e r

H e x a g o n N u t

Figure 3-66. Pull Tractor Sensor removal

Rev. B 3-45