DFX-8500
3.2.1 ROM Replacement
CAUTION
;It is best to remove the top cover before you tilt back the printer as described in the steps below. Refer to Section 3.2.3.1 for instructions on removing the top cover.
;If you tilt back the printer with the top cover attached, be careful not to put too much weight on the top cover or any other printer components.
;Spread a thick, soft cloth under the printer before you follow the steps below.
;Remove the ROM carefully to avoid damaging the board.
;Before you install a new ROM, check the INDEX mark on the socket to be sure the ROM is oriented correctly. Insert the ROM carefully to avoid damaging the ROM pins and the board.
;When transporting the printer a long distance, pack it using the original packing material.
Step 1: Tilt back the printer and lay it on its back. Hold the top cover closed if it is not removed.
Step 2: Remove the CBB (M3x10) screw securing the ROM cover, remove the cover, and replace the ROM using the ROM holder.
C B B ( M 3 X 1 0 )
Figure 3-7. ROM Replacement
Rev. B |
