DISASSEMBLY AND ASSEMBLY
3.2.6.23 Paper Support Assembly Removal
Step 1: Disassemble the carriage mechanism and remove all the parts related to the carriage. (Refer to Section 3.2.6.22.)
Step 2: Referring to the exploded diagram in the Appendix, remove the paper support assembly.
ADJUSTMENT REQUIRED
When you install the paper support assembly, perform the following adjustments:
∙Carriage timing belt tension adjustment (described in Section 4.1.2)
∙Carriage guide shaft parallelism adjustment (described in Section 4.1.5 and Section 4.1.6)
∙Platen gap motor value (platen gap) adjustment (described in Section 4.1.7)
∙Bidirectional printing adjustment (described in Section 4.1.8)
|
|
|
Rev. B |