HP E1418A manual TRIGgerIMMediate

TRIGger

TRIGger

	The TRIGger subsystem controls when and how the outputs are enabled.
	Other commands, designed for use with the TRIGger subsystem are ABORt
	and INITiate[:IMMediate].
Subsystem Syntax	TRIGger
	[:IMMediate]
	:SOURce <source>
	:SOURce?

TRIGger[:IMMediate]

TRIGger[:IMMediate] triggers all channels waiting for trigger when the trigger source has been set to either BUS or HOLD.

Parameters None.

Comments ∙ To use this command to trigger outputs, the trigger source must be set to either BUS or HOLD. An error is generated if other trigger sources are set.

∙If this command is received and the module is not in the wait-for-trigger state, an error is generated.

∙Triggering is described in more detail on page 54.

∙Related Commands: TRIGger:SOURce,

SOURcen:VOLTage[:LEVel][:IMMediate]:TRIGgered[:AMPLitude], SOURcen:CURRent[:LEVel][:IMMediate]:TRIGgered[:AMPLitude]

104 HP E1418A SCPI Command Reference Chapter 3