HP E1418A manual Test, TESTNUMBer?

TEST

TEST

	The TEST subsystem provides commands used to run individual self-tests and to
	query the results of previous self-tests. To run the complete set of self-tests, use the
	*TST? common command.
Subsystem Syntax	TEST
	:NUMBer? <number>
	:TST
	[:RESults]?
	*TST?

TEST:NUMBer?

TEST:NUMBer? <number> performs a single internal self-test on the module and returns a 16-bit integer indicating the results of the self-test.

Parameters

Parameter	Parameter	Range of	Default
Name	Type	Values
<number>	numeric	1 to 75	none

Comments ∙ Following the completion of this command, all outputs are disabled and set to either 0 A or 0 V.

∙If the module is in the wait-for-trigger state when this command is received, an error is generated.

∙Complete descriptions of each test and specific codes returned in the Test Info field are contained in the HP E1418A Service Manual.

∙A successful self-test returns 0.

∙A failure of a self-test returns a non-zero 16-bit integer. The integer returned has a binary coding of the form:

BIT	15	14	13	12	11	10	9	8	7		6	5	4	3	2	1	0
Meaning				Test Number						A24				Test Info

∙The description of *TST provides a brief listing of the test numbers.

Chapter 3 HP E1418A SCPI Command Reference 101