Calibration
Isolation Status
Register
The Calibration Isolation Status Register provides a
Address | Bit | 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
READ | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | Ch | ||
Base + 18816 | ||||||||||||||||||
| 16 | 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | ||
| WRITE | |||||||||||||||||
| Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | Iso | ||
|
| |||||||||||||||||
|
| Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | Cal | |
|
| Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | Stat | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ch XX Iso Cal Stat: This field is set to a one (1) when the last calibration of the channel was performed with the channel configured as
Notes This register is not set or used by the hardware. The HP E1418A SCPI driver, if used to calibrate the module, automatically sets the bits in this register. If you use register programming to calibrate this module, you may wish to use this register to record the calibration status.
The Voltage Calibration Status Register, the Current Calibration Status Register, the Calibration Isolation Status Register, and the Calibration Card Configuration Register are used together to maintain the overall calibration status of the module.
Changes in the values of these fields indicate a change in the module configuration and may indicate the need to recalibrate the module.
146 HP E1418A | Appendix B |
