HP E1418A Commands, Linking, Linking IEEE 488.2 Common Commands with SCPI Commands. Use a

Linking	Linking IEEE 488.2 Common Commands with SCPI Commands. Use a
Commands	semicolon between the commands. For example:
	*RST;APPLy2:VOLT 10 or INIT:IMM;*IDN?
	Linking Multiple SCPI Commands. Use both a semicolon and a colon between
	the commands. For example:
	SOURce2:FUNCtion:MODE VOLT;:SOURce2:VOLTage 10

SCPI Command Reference

The following sections describe the Standard Commands for Programmable Instruments (SCPI) commands for the HP E1418A D/A Converter Module. Commands are listed alphabetically by subsystem and within each subsystem. A command guide is printed in the top margin of each page. The guide indicates the current subsystem on that page.

62 HP E1418A SCPI Command Reference Chapter 3