HP E1418A Command Quick Reference

 

Command

Description

 

 

 

 

 

 

STATus

:OPERation:CONDition?

Returns the contents of the Operation Status Condition

 

 

Register. Reading the register does not affect its contents.

 

:OPERation:ENABle <mask>

Specifies which bits of the associated Event Register are

 

 

included in bit 7 of the Status Byte Register. The Summary

 

 

bit is the bit-for-bit logical AND of the Event Register and the

 

 

unmasked bit(s).

 

:OPERation:ENABle?

Returns the value of the mask set for the Operation Status

 

 

Register.

 

:OPERation[:EVENt]?

Returns the value of the contents of the Operation Status Event

 

 

Register. Reading the register clears all bits in the register.

 

:PRESet

Presets all Enable Registers to 0. The command has no

 

 

effect on Condition or Event Registers.

 

:QUEStionable:CONDition?

Returns the value of the Questionable Status Condition

 

 

Register. Reading the register does not affect its contents.

 

:QUEStionable:ENABle <mask>

Specifies which bits of the associated Event Register are

 

 

included in bit 3 of the Status Byte Register. The Summary

 

 

bit is the bit-for-bit logical AND of the Event Register and the

 

 

unmasked bits.

 

:QUEStionable:ENABle?

Returns the mask set for the Questionable Status Enable

 

 

Register.

 

:QUEStionable[:EVENt]?

Returns the value of the Questionable Status Event

 

 

Register. Reading the register clears all bits in the register.

 

 

 

SYSTem

:ERRor?

Returns an error number and message from the

 

 

instrument’s error queue.

 

:VERSion?

Returns the SCPI version with which the driver complies.

 

 

 

TEST

:NUMBer? <number>

Performs a single internal self-test on the module and

 

 

returns a 16-bit integer indicating the results of the self-test.

 

:TST[:RESults]?

Returns an array showing the result of all self-tests

 

 

performed by the *TST? query.

*TST?

 

Performs all internal self-tests on the module and returns a

 

 

16-bit integer indicating the results of the self-test.

 

 

 

TRIGger

[:IMMediate]

Triggers any channels waiting for trigger when the trigger

 

 

source is set to either BUS or HOLD.

 

:SOURce <source>

Sets the trigger source for the module.

 

:SOURce?

Queries the trigger source for the module.

 

 

 

 

ABORt

Disables the trigger system and places the module in the

 

 

idle state.

 

INITiate[:IMMediate]

Changes the trigger system from the idle state to the

 

 

wait-for-trigger state.

 

 

 

 

 

 

Chapter 3

HP E1418A SCPI Command Reference 109

Page 109
Image 109
HP E1418A manual Test