HP E1418A manual SOURce SOURcenVOLTageLEVelIMMediateAMPLitude

SOURce

SOURcen:VOLTage[:LEVel][:IMMediate][:AMPLitude]

SOURcen:VOLTage[:LEVel][:IMMediate][:AMPLitude] <value MIN MAX DEF>

immediately outputs the voltage set in value at channel n when the output relay is closed.

Parameters

	Parameter	Parameter	Range of	Default
	Name	Type	Values
	SOURcen	keyword	1 to 8 or 1 to 16	1
	<value>	numeric (float 32) or	-16 V to +16 V or	0
		discrete	MIN MAX DEF
Comments ∙ In the keyword, SOURcen, the valid range of n is:
	1 to 8 for	E1418A, E1418A Option 002
	1 to 16 for	E1418A Option 001, E1418A Option 003.

Values of n outside these ranges will generate an error.

∙The <value> parameter is a floating point 32-bit number in the range of -16 Volts to +16 Volts.

MIN sets -16 Volts. MAX sets +16 Volts. DEF sets 0 Volts.

∙This command immediately programs the specified voltage on channel n. The output relay for that channel must be closed for the voltage to appear at the output terminals.

∙This command generates an error if channel n is in the current output mode.

∙Related Commands: SOURcen:FUNCtion:MODE VOLTage,

SOURcen:VOLTage[:LEVel][:IMMediate][:AMPLitude]?, OUTPutn[:STATe]

Chapter 3 HP E1418A SCPI Command Reference 91