HP MSL6000 manual Fsc

Table 10 Fault Symptom Codes (continued)
FSC	Message	ERP
3054	Need 1 Drive Minimum	•	Install or activate a drive.
	(No available drive to run diag.)	•	Press the Enter button to clear the
			message.
		• Invalid user initiated operation. Set
			parameters correctly and try again.
3055	Memory Allocation Error	•	Cycle power to the library or reboot by
	(Memory allocation error in diagnostic.)		using the LCD touch display. Wait 30
			seconds to power up again.
3057	Invalid Magazine Type	•	Upgrade firmware if a newer revision
	(Unsupported magazine type detected.)		exists.
		•	Press the Enter button to clear the
			message.
		•	Check magazine type.
		• Invalid user initiated operation. Set
			parameters correctly and try again.
3058	Magazine Type Change Not Handled	•	Upgrade firmware if a newer revision
	(Unsupported magazine type detected.)		exists.
		•	Press the Enter button to clear the
			message.
		•	Check drive type.
		• Invalid user initiated operation. Set
			parameters correctly and try again.
3059	Drive Type Not Supported	•	Upgrade firmware if a newer revision
	(Unsupported magazine type detected.)		exists.
		•	Press the Enter button to clear the
			message.
		• Invalid user initiated operation. Set
			parameters correctly and try again.
3060	Zone Sequence Error	•	Cycle power to the library or reboot by
			using the LCD touch display.
		• Update the Map using the LCD touch
			display. (Menu -> Maintenance -> Force
			reconfiguration)
3061	Homing Error	•	Cycle power to the library or reboot by
	(Unable to complete Shuttle Homing		using the LCD touch display.
		•	Update the Map using the LCD touch
	Algorithm.)
			display. (Menu -> Maintenance -> Force
			reconfiguration)

MSL6000 series tape library user guide 115