File.
Figure 77 Copying firmware using the Remote Management Interface
NOTE: If you select Flash Library from Local File, the *.bin file must be copied from ftp://ftp.hp.com/pub/products/storageworks/msl to the /upload directory, which is located on the library at the IP Address/upload. The level 1 password may be required to perform this procedure.
Figure 78 Confirming the Flash operation using the Remote Management Interface
5.Click Confirm to start the Flash operation. The library firmware automatically updates.
6.The library will reboot. Verify that the firmware level has been updated successfully by selecting the Library Info button from the View System Data area of the GUI to view the Firmware Revision.
Using HP StorageWorks Library & Tape Tools
HP StorageWorks Library & Tape Tools may already be installed on your host. If not, you can download it from http://www.hp.com/support/tapetools.
Online help and instructions are included with the utility.
Using a Serial Connection
To update the firmware using the MSLUtil.exe you will need:
•MSLUtil.exe and the proper version of firmware, available for download from the HP website at http://www.hp.com/support.
98 Maintenance
