1 Introduction
Designed for backup operations with high-end networks and high-performance servers, the HP StorageWorks MSL 6000 Series tape libraries are the next generation performers in high-volume backup and archival service. The libraries also feature high availability, maximum storage density, and easy serviceability.
The library SCSI interface-to-host system supports Low Voltage Differential (LVD). The tape drives and the robotics control functions each use separate SCSI connections and SCSI ID addresses. Library SCSI I/O is provided through two VHDCI-series, 68-pin, Micro-D SCSI connectors located at the rear of the unit on each tape drive. Robotics SCSI I/O is provided through two VHDCI-series, 68-pin, Micro-D SCSI connectors located on the library controller board.
The remainder of this chapter describes the major components of the library, including:
•Models, page 15
•Accessories, page 16
•Tape Drives, page 16
•Magazines, page 21
•Power Supplies, page 22
•Robotics, page 23
•Library Controller Board, page 23
•Factory-Defined Accessory PCI Slots, page 25
•Front Panel Indicators, page 26
•Multi Unit Library Systems, page 27
Models
The MSL Series tape library family includes the following models:
•Two-drive models:
•MSL6030
•MSL6026
•Four-drive models:
•MSL6060
•MSL6052
NOTE: MSL6030/MSL6060 libraries operate with Ultrium LTO drive technology; MSL6026/MSL6052 libraries operate with SDLT drive technology.
MSL6000 series tape library user guide 15
