Fsc

Table 10 Fault Symptom Codes (continued)

FSC	Message	ERP
9003	Master pass-thru opto failed.	• Press the Enter button to reboot.
	(The master module opto sensor was not	• Run the sensor test, checking appropriate
	detected during the power-up	sensor.
	Pass-Through module inventory.)	• Determine if the pass-through may have
		been plugged or unplugged while power
		was on to the library.
		• Reinitialize or power-cycle the master it is
		connected to. Ensure the pass-through is
		functioning by observing whether or not
		the pass-through car moves to either end
		of the pass-through smoothly.

A001	SMX send error	• Press the Enter button to reboot.
	(An attempt to place a message on a	• Cycle power to the library or reboot
	task’s exchange generated a kernel	using the GUI touch screen.
	error.)

A002	SMX receive error	• Press the Enter button to reboot.
	(An attempt to receive a message from a	• Cycle power to the library or reboot
	task’s exchange generated a kernel	using the GUI touch screen.
	error.)

A003	Comm free list empty	• Press the Enter button to reboot.
	(An attempt to acquire a message from	• Cycle power to the library or reboot
	the free pool failed because the pool is	using the GUI touch screen.
	empty.)

A004	Invalid comm. put attempt	• Press the Enter button to reboot.
	(An attempt to place a message on a	• Cycle power to the library or reboot
	task’s exchange failed.)	using the GUI touch screen.

A005	Invalid comm. get attempt	• Press the Enter button to reboot.
	(An attempt to receive a message from a	• Cycle power to the library or reboot
	task’s exchange failed.)	using the GUI touch screen.

A006	Comm initialization error	• Press the Enter button to reboot.
	(The Comm manager could not be	• Cycle power to the library or reboot
	initialized at power-up because system is	using the GUI touch screen.
	out of memory.)

A007	Put of a NULL comm.	• Press the Enter button to reboot.
		• Cycle power to the library or reboot
		using the GUI touch screen.

HP MSL6000 manual Fsc

Models: MSL6000

ERP

MSL6000 series tape library user guide 133