
Figure 48 View library options screen
Table 5 lists and describes the available Library options.
Table 5 View Library Options |
|
|
|
Option | Description |
Library Remains Offline After | Library does not go online after |
| must select the Online option from the Menu screen on the GUI |
| touch screen. The default is Disabled. |
|
|
Auto | Enables a tape drive to be automatically powered up (after a |
Drive After Timeout | delay), after replacing a tape drive if you do not explicitly power |
| up the tape drive from the GUI touch screen. The default is |
| Enabled. |
|
|
Unload Mode | Lets you determine whether a SCSI MOVE MEDIUM command |
| is interpreted as Implicit or Explicit. If Implicit, the library unloads |
| a tape drive before attempting to move a cartridge from that |
| tape drive. If Explicit, the host must issue a SCSI UNLOAD |
| command to a tape drive before each MOVE MEDIUM |
| command that removes a cartridge from that tape drive. The |
| default is Implicit. |
|
|
Total Reserved Slots | Lets you reduce a specified number of slots at the rear of a |
| magazine. Some host software imposes size limits on library |
| magazines for licensing purposes, and does not operate with a |
| library that exceeds the licensed size. The default is 0. |
|
|
Auto Clean Mode | Lets you enable an automatic tape drive cleaning cycle. To use |
| this option, you must have reserved a slot for a cleaning |
| cartridge using the Total Reserved Slots option. The default is |
| Disabled. |
|
|