Figure 20 SCSI option selection screen (two-drive model shown)

NOTE: You can move to the next sequential SCSI options screen by touching the T.

For example, to set the Drive 0 Bus ID to 3:

a.Select the box next to the text “Drive 0 Bus ID:.” The resulting screen (see Figure 21) displays the current Drive 0 Bus ID along with the new value that you request.

Figure 21 Drive 0 bus ID screen

b.Touch the block that contains the number 3. This places your request into the New data field.

c.Touch the Save option to confirm your request. A confirmation screen is displayed (see Figure 22).

40 Library Configuration