Table 6 View SCSI Options (continued)
Option | Description |
Data Transfer Speed | Lets you set the robot or library SCSI data transfer rate to |
| Synchronous, 10 MB/sec, Synchronous, 5 MB/sec, or |
| Asynchronous Only. The default is Synchronous, 10 |
| MB/sec. |
|
|
Report Element Type | The default is Disabled. |
|
|
Fast Terminate | The default is Disabled. |
Sequence |
|
|
|
Network Options
Selecting this option lets you view the settings defined from the Network option in the Edit Options area (see Figure 50). Table 7 on page 68 lists and describes the available options.
NOTE: There are no firmware default settings for networks. Contact your network administrator for specific information on connecting the library to your network.
Figure 50 Default view network options screen
NOTE: The IP Address, IP Mask, IP Gateway, and DNS Server become available after selecting User Specified IP Address from the Network screen under Edit Options.
