Figure 16 Converting a rackmount model (two-drive model shown)

Applying Power to the Library

To apply power to the library (see Figure 17):

1.Connect each supplied power cord X to each power supply receptacle.

NOTE: For four-drive models only, the left-hand AC power receptacle is for the bottom power supply. The right-hand AC receptacle is for the top power supply.

2.Toggle each power switch Y on.

MSL6000 series tape library user guide 35

Page 35
Image 35
HP MSL6000 manual Applying Power to the Library, Converting a rackmount model two-drive model shown