HP MSL6000 manual Fsc

Table 10 Fault Symptom Codes (continued)
FSC	Message	ERP
3110	Picker Retries Exceeded	• Cycle power to the library or reboot by
		using the LCD touch display.
		• Run cartridge cycle test using the LCD
		touch display. (Menu -> Maintenance ->
		Diagnostic options)
		Note: If the backup application is running,
		update the application cartridge map.
3111	Picker Retries Exceeded 1	• Press the Enter button to reboot.
	(Picker retries exceeded during a	• Cycle power to the library or reboot
	pass-through fetch operation.)	using the GUI touch screen.
		• Check pass-through alignment.
3112	Picker Retries Exceeded 2	• Cycle power to the library or reboot by
		using the LCD touch display.
		• Run cartridge cycle test using the LCD
		touch display. (Menu -> Maintenance ->
		Diagnostic options)
		Note: If the backup application is running,
		update the application cartridge map.
3113	Picker Retries Exceeded 3	• Press the Enter button to reboot.
	(Picker retries exceeded during a bin stow	• Cycle power to the library or reboot
	operation.)	using the GUI touch screen.
		• Ensure that there are no obstructions
		inside the library (all cartridges are in
		magazines).
		• Ensure cartridges are fully inserted in the
		magazine(s).
3115	Picker Retraction Error	• Press the Enter button to reboot.
	(Picker did not retract during a bin check	• Cycle power to the library or reboot
	operation.)	using the GUI touch screen.
3200	Shuttle Jammed	• Press the Enter button to reboot.
	(Shuttle could not reach target location.)	• Check pass-through mechanism
		alignment.
		• Cycle power to the library or reboot
		using the GUI touch screen.

MSL6000 series tape library user guide 123