HP MSL6000 manual Factory-Defined Accessory PCI Slots, Library controller board connections

NOTE: For MSL Series libraries, the library controller board must be installed in the right-hand slot of the card cage area (upper card cage area for the four-drive models). The remaining slots on the library do not support the connections that are required for the library controller board to operate correctly.

.

1	SCSI VHDCI connector	4	Ethernet RJ-45 connector
2	SCSI VHDCI connector	5	Serial RS232 connector

3Mode toggle switch

Figure 7 Library controller board connections

NOTE: The mode toggle switch is not active.

Factory-Defined Accessory PCI Slots

MSL Series tape libraries contain one or two rear-access card cages, and one or two 32-bit,

33-MHz Compact PCI backplanes (see Figure 8). These backplanes contain the plug-in connectors for a library controller board, and up to five optional HP-defined PCI add-in cards.

CAUTION: Use of non-HP qualified PCI option cards can damage your MSL Series library and will void product warranty. Follow all operating instructions shipped with the optional card upgrade kit.

MSL6000 series tape library user guide 25