HP R4.2 Equipment State, all, Note:, detach, channel, circuit card, Voice Equipment, 3 Voice System Administration

3 Voice System Administration Voice Equipment

Note that background speech plays at a lower volume than foreground speech.

3Enter circuit card or channel in the Equipment: field, or press F2 (Choices) to select from a menu. If you specify a circuit card, the option is set for all channels of that circuit card.

4Enter a single number or range of numbers to select the voice circuit cards or channels to change in the Equipment Number: field, or enter all (default).

5Press F3 (Save).

The system saves the voice equipment options.

Equipment State

The equipment states, listed below, indicate to the voice system whether or not a voice circuit card/channel is ready and able to receive calls, process speech, and so on.

Note: Cards in the NONEX state (that is, those that have been physically removed from the system, or have been "detached" using the detach command) do not show up in Display Voice Equipment window.

The Change Equipment State menu option allows you to change the state, or maintenance state, of a card or channel. Some states are valid only for cards

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 103