HP R4.2 iCk, iCk, iCk, iCk, •core, iCkCmd, /etc/utmp, iCk, iCkAdmin, /tmp/iCk.core, /vs/etc/default/iCk, A Summary of Commands

A Summary of Commands iCk, iCkAdmin

•core

This command is available for debugging purposes. It causes iCk to produce a core file in /tmp/iCk.core via a core dump operation is a spawned child process. In other words, iCk itself does not stop, but you do get a reliable core of iCk for debugging evaluation.

Default File

The iCk process responds to default parameters placed in /vs/etc/default/iCk. Initially there are two values. These values set specific internal parameters:

•RUNLEVELTIMEOUT

This parameter specifies how long to wait after changing run levels before accepting the value from /etc/utmp without confirmation from iCkCmd. The default is 3 minutes.

•RECHECKTIMEOUT

This parameter specifies how long to wait after changing run levels before rechecking for new processes in the Bulletin Board. The default is 30 seconds.

Also any environment variables desired can be set in the default file.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 496