7 Common Administration

Reports Administration

5Enter a single circuit card number or multiple circuit card numbers separated by commas in the Card: field to limit the display to specific circuit cards. There is no default value and the Choices menu is not available. If you specify all in the Card: field, the display is limited to messages about voice system circuit cards only.

6Enter the start time for the message search in the Start Time: field, that is, the time of the first message to be displayed. For example, entering 02/05 10:00 indicates that you want to search messages that occurred on February 5 after 10 a.m.

Use the format of MM/DD HH:MM for month, day, hour, and minute. If the Start Time field is left blank, the beginning of the message log is used. If you enter today, all entries since the beginning of the current day are searched.

7Enter the stop time for the message search in the Stop Time: field, that is, the time of the last message to be displayed.

Use the format of MM/DD HH:MM for month, day, hour, and minute. If the Stop Time: field is left blank, the end of the message log is used. If you enter today, all messages logged up to (but not including) the current day are displayed.

Note: If nothing is entered in the Start Time: and Stop Time: fields, these fields default to 00:00 of the current date. As a result, no records are displayed in the Message Log Report.

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 341