HP R4.2 NULL, <process, <process, <application, <application, <application, <application, IRP_SERVICE_NAME, IRP_SERVICE_NAME, irRegister(3irAPI)

A Summary of Commands defService

When the application is started by the Application Dispatch (AD) process, the IRP_SERVICE_NAME is set to the -s <servicename> argument if <servicename> is non-NULL. Otherwise, IRP_SERVICE_NAME is set to <application>, where the default is NULL.

The -toption specifies whether the process that provides the IRAPI application <application> is a permanent (P) or transient (T) process. The default is P for permanent.

If the process that provides the IRAPI application <application> is a permanent process, then -p <process> must be the name the process uses as an argument to irRegister(3irAPI). If the process that provides the IRAPI application <application> is a transient process, then -p <process> must be the full pathname of the process. No default exists for this option.

When the application is executed on a PRI line, the [-a 0 1 2 3 4] option specifies how the ANI should be supplied to the application. The valid values for this option are as follows:

•0 — No ANI supplied; the default

•1 — ANI type billing number only

•2 — ANI type billing number preferred

•3 — ANI type calling party SID)) only

•4 — ANI type calling party (SID) preferred

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 415