HP R4.2 manual 211

4 Switch Interface Administration Digital Interfaces

Unassigning the Digital R2 MFC - Mexico Protocol to E1 Circuit Cards

Note: Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 103 in Chapter 3, Voice System Administration , for additional information.

To unassign the Digital R2 MFC - Mexico protocol:

1Start at the Digital R2 MFC Protocol - Mexico menu (Figure 93 on page

164) and select:

> Unassign Card

The system displays the Unassign Card: Digital R2 MFC Protocol - Mexico window (Figure 97 on page 173).

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 172