A Summary of Commands

restore

T1 diagnostics are executing online tests and a conflict is detected, the restore command is blocked. If T1 diagnostics are executing offline tests and a conflict is detected, the user is asked whether to wait until the conflict is resolved or to terminate the request to restore.

To delete out of the command, press D ELE TE . If this does not stop the command, you may need to press C ON TR O L and backslash simultaneously. If, while running restore, you want to abort the command, a message similar to the following may appear:

At the user’s request, administration of the following cmd(s) has been interrupted.

CARD NUMBERS: <card numbers>

To assure proper operation of the identified card(s), run diagnostics at the earliest opportunity.

When restore is aborted, you should diagnostics on all cards being administered to ensure that they are returned to a fully functional state.

Example

The following example restores card 0 to service.

restore card 0

The following example restores channels 0, 1, and 5 to service.

restore channel 0-1,5

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 561