HP R4.2 manual 209

4 Switch Interface Administration Digital Interfaces

Displaying Digital R2 MFC - Mexico Parameters

The E1 circuit card must first be assigned to the Digital R2 MFC - Mexico protocol to use this procedure. See Assigning the Digital R2 MFC - Mexico Protocol to E1 Circuit Cards on page 164 for more information about making the initial assignment.

To display the Digital R2 MFC - Mexico parameters of an E1 circuit card:

1Start at the Digital R2 MFC Protocol - Mexico menu (Figure 93 on page

164) and select:

> Display Parameters

The system displays the Display Parameters: Digital R2 MFC Protocol - Mexico window (Figure 96 on page 171).

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 170