HP R4.2 Adding a Local Database Access ID

5 Database Administration Voice System Database Administration

Database Access IDs

Each ID listed in the Database Access ID Table window represents an established local or remote connection to an ORACLE database. This connection is used by the voice system’s applications to access a customer’s database tables. The database ID, then, represents each local or remote database to the voice system.

An application can access multiple database tables in a local database (that is, a database that resides on the voice system’s hard disk). However, you can improve the access performance by adding multiple database access IDs to that local database to split the access evenly between the multiple database access IDs.

Adding a Local Database Access ID

To add a local database access ID:

1Start at Database Access ID Table window (Figure 107 on page 229).

2Press F8 (Chg–Keys).

The system displays the alternate set of function keys.

3Press F1 (Add).

The system displays the Add A Database Access ID menu (Figure 108 on page 232).

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 231