HP R4.2 all, from, from, eqpgrp, delete card, delete eqpgrp, delete channel, delete card/channel, A Summary of Commands

A Summary of Commands delete card/channel

Synopsis

delete card <card.[port]> from [eqpgrp] <group number> delete channel <number> from [eqpgrp] <group number>

Description

The delete card/channel command removes the specified card or channel from a service or equipment group. The parameters for the delete card/channel command are:

•<card.[port]> — Specifies the card or channel number (a single card or channel number from a range of 0–255, a range of card or channel numbers in the form m–n, or the word all for all card or channel numbers).

•eqpgrp — Specifies “svcgrp” when deleting from a service group or “eqpgrp” when deleting from an equipment group. If no group type is given, the “svcgrp” is assumed.

•<group number> — Identifies the equipment group or service group.

If you want to remove all cards or channels from an equipment group, it may be easier to delete the entire equipment group than to delete channels or cards. To delete an equipment group, use the delete eqpgrp command.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 417