HP R4.2 all, Yes, Yes, card, inserv, manoos, channel, Voice Equipment, 3 Voice System Administration

3 Voice System Administration Voice Equipment

The system displays the Change State of Voice Equipment window (Figure 65).

Figure 65. Change State of Voice Equipment Window

2Enter the state to which the designated equipment should be changed in the New State: field or press F2 (Choices) to select from a menu. Valid choices are inserv (in service) and manoos (manual out–of–service).

3Enter channel or card for the type of equipment in the Equipment: field, or press F2 (Choices) to select from a menu.

4Enter the equipment number or numbers for which you want to change the state in the Equipment Number: field. Type a single number, a range of numbers separated by commas or spaces, or all (default).

5(Optional) Enter Yes or No in the Change Immediately: field. If you enter Yes, active calls on the specified equipment are disconnected abruptly. If you enter No, the state is changed after all current calls end. The changes might not be displayed immediately if you use the No value. If you leave this field blank, the No value is used as the default.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 107