HP R4.2 manual 190

4 Switch Interface Administration Digital Interfaces

The system displays the T1 A/B Robbed-bit E&M menu (Figure 88).

Figure 88. T1 A/B Robbed-bit E&M Menu

Assigning T1 A/B	Note: Before a new protocol can be assigned to a circuit card, any
Robbed-bit E&M to	existing protocol must first be unassigned. See Unassigning T1
Digital Circuit Cards	A/B Robbed-bit E&M to Digital Circuit Cards on page 161 below
	for more information.
	Before attempting to make any assignment changes to circuit
	cards, they must be in the MANOOS state. See Equipment State
	on page 103 in Chapter 3, Voice System Administration , for more
	information.
	If you change digital protocol assignments on the voice system,
	you must also make the change on the switch.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 151