HP R4.2 remove, remove, rem card, rem card all, rem channel 0-2,4, A Summary of Commands

A Summary of Commands remove

To delete out of the command, press D ELE TE . If this does not stop the command, you may need to press C ON TR OL and backslash simultaneously. If, while running remove, you want to abort the command, a message similar to the following may appear:

At the user’s request, administration of the following cmd(s) has been interrupted.

CARD NUMBERS: <card numbers>

To assure proper operation of the identified card(s), run diagnostics at the earliest opportunity.

When remove is aborted, you should run diagnostics on all cards being administered to ensure they are returned to a fully functional state.

Example

The following example removes card 0 from service.

rem card 0

The following example removes channels 0 through 2 and channel 4 from service.

rem channel 0-2,4

The following example removes all cards from service.

rem card all

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 558