HP R4.2 Note:, GEN.2, SYSMSG, vfyLogMsg, vfyLogMsg, logGEN(2), log{CLASS}.h, •logGEN(2) or GEN.2, A Summary of Commands

A Summary of Commands vfyLogMsg

Note: You cannot use the vfyLogMsg command to look up a message format for a message class that you have just created, but not yet installed.

The msgnum argument can be in any of the following four formats:

•absolute message number

The absolute message number format would be used if you were examining compressed logging files with an editor, for example, 238

•symbolic name

The symbolic name is found in the associated log{CLASS}.h header file, for example, SYSMSG

•message class/relative index in class pair

•logGEN(2) or GEN.2

This last format can be specified in two ways: logGEN(2) or GEN.2 Two forms exist because the log{CLASS}(index) form must be enclosed in quotes when used from the command line because the ‘(‘ and ‘)’ are shell meta-characters, which are difficult to type.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 614