A Summary of Commands

vsdisable

The fifth block of information describes each destination bit specified in the destination bit mask, starting with the lowest order bit.

Example

lComp

See Also

logCat logDstPrivsdisable

The vsdisable command disables the automatic restarting of the voice system.

Synopsis

vsdisable

Description

The vsdisable command is used to prevent the voice system from being started when the system is rebooted. Running vsdisable allows you to log into the system before the voice system is started. The voice system may be started manually at any time with the start_vs command.

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 616