HP R4.2 rmdb, spar, spar, spadc, spadc, spres, remove, Command, restore, Function, show_sys, soft_szr, removepkg, soft_disc, retireAlarms, A Summary of Commands

A Summary of Commands Overview

Table 27. Command Synopsis

Command	Function
remove	Places a unit in the manual-out-of-service (MANOOS) state.
removepkg	Removes a software package.
restore	Restores a unit to the in-service (INSERV) state.
retireAlarms	Turns off minor, major, and critical alarms on the TAM unit.
rmdb	Displays the state of the resource manager and modify debug
	levels.
show_sys	Allows you to retrieve configuration and administration information
	from customer sites.
soft_disc	Sends a disconnect to a script on a channel or channels.
soft_szr	Starts a script on a channel.
spadc	Collects data on the signal processing resources. Use the spar
	command to generate reports on the data (SSP only).
spar	Generates reports on the signal processing data activity collected
	by the spadc command (SSP only).
spres	Restores speech from a backup (SSP only).
	7 of 9

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 368