A Summary of Commands

trarpt

The parameters for the trarpt command are:

•<hours> — Specifies the hours in which the traffic data was collected. The valid options can be a range between 0 to 23 (with 0 representing midnight and 23 representing 11 p.m.) or “all.”

•<summarize> — Indicates a traffic report or a traffic summary report to be generated. If the option is “n”, the report provides information on the total traffic volume for each channel in one-hour increments. If the option is “y,” the report is a summary report that provides information on the total traffic volume for each channel for the whole period specified in the <hours> parameter.

•<date> — Specifies the date the data was collected in the system. This parameter can be in the mm/dd/yy or mm/dd/yyyy format.

If a 2-digit year argument is used, the following rules apply:

~If the year argument is 70 and above, the 20th century is assumed. For example, 5/27/96 is interpreted as May 27, 1996.

~If the year argument is between 00 and 69, the 21st century is assumed. For example, 5/27/06 is interpreted as May 27, 2006.

Example

The following two examples generate a traffic summary report for data collected on date August 24, 1993 between 8 a.m. and 5 p.m. on multiple entries per channel, and are equivalent command statements.

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 611