A Summary of Commands

display card

display card

The display card command displays information about specified cards.

Synopsis

disp[lay] card [option [option] ]

Description

The display card command displays data about a specified card or about cards in a specified state. In the output, the physical slot number, the osindex, and the voice system card number are all the same. The output also correctly reflects which card is primary master, which is secondary master, and which cards are slave.

The display card command options are:

card# port# — Displays information on card card# and on port port# of the specified card. All ports are shown if port# is not given. A range of cards may be specified in the form m–nwithout using the port# option.

all — Displays information on all cards.

t1 — Displays all T1 cards.

sp — Displays all SSP cards.

lsps — Displays all LSPS cards.

UCS 1000 R4.2 Administration 585-313-507

Issue 3 April 2000 435