HP R4.2 <ssp#, wl_edit, wl_edit, language, directory, display card, A Summary of Commands, /usr/tmp/wledit.output

A Summary of Commands wl_edit

Audible playback is provided with Text-to-Speech so that you can hear the pronunciation of any word. You must dial into the channel specified with the - l option to hear the pronunciations.

Error messages are written to a small window at the bottom of the screen. Error messages are also logged to the file /usr/tmp/wledit.output.

The -s<ssp#> argument is used to specify which SSP circuit card to use for speech playback. Circuit cards are referenced by O.S. index displayed in the display card command.

The -Llanguage argument is used to specify the language output that appears on the screen.

The -Ddirectory argument is used to specify that the program will start in the given directory.

The -Ooption is for debugging purposes. It causes certain events to be recorded in the output window.

The -Ioption inhibits forced initialization of the SSP circuit cards. The wl_edit command usually determines if the cards need to be reset and provides a forced initialization. The advantage of using this option is that the FlexWord Editor comes up faster. The disadvantage is that in some unusual situations you may not be able to hear the pronunciation of your words. If this happens, run wl_edit again without specifying the -Ioption.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 621