HP R4.2 trace, erase, Note:, spfunc, t1prot, eqprot, delete, remove, hconfig, stop_vs, disable, restore, hdelete, start_vs, diagnose, vs_enable, autoreboot

7 Common Administration Reports Administration

Commands and

Activities Included

in the Report

Content of the

Administrative

Commands Log

Report

The following administrative commands and activities are monitored for inclusion in this report:

•Digital switch interface changes

•Voice equipment commands: spfunc, t1prot, eqprot, hconfig

•System control commands: start_vs, stop_vs, disable, autoreboot, delete, remove, restore, hdelete, trace, erase, diagnose, vs_enable

•Talkfile (speech files) commands: add phrase, copy phrase

The command or activity results in either one or two entries to the Administrative Commands Log:

•Start message entries — indicate the execution of the administrative command or activity

•End message entries — indicate the result of the command or activity if the information would be critical for troubleshooting purposes

Note: Some commands and activities log only a Start message entry.

Displaying the

Administrative

Commands Log

Report

Display the Administrative Commands Log report through the Message Log Report.

To display the Administrative Commands Log Report:

1Start at the Reports menu (Figure 141 on page 310) and select:

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 345