HP R4.2 assign card/channel, trace, annotate, annotate, annotate, assign card, /vs/bin/tools, assign channel, assign card/channel, A Summary of Commands

A Summary of Commands assign card/channel

Description

The annotate command sends a message to TSM requesting that the given message be put into TSM’s trace stream. This command is useful for testing and debugging scripts.

If a channel is specified, the message is associated with the channel’s trace stream. The message must be fewer than 160 characters.

The annotate trace message is displayed in the trace output if a trace is running when the annotate command is executed. If no trace command is running, the annotate trace message is discarded.

Files

/vs/bin/tools

Example

The following example sends a message to TSM to put the message “This is test 1 for channel 1” in channel one’s trace stream.

annotate 1 “This is a test 1 for channel 1”assign card/channel

The assign card command assigns a group number to a card.

The assign channel command assigns a group number to a channel.

UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 375