Intel 8XC196MD, 8XC196MH manual 8XC196MC, MD, MH USER’S Manual

8XC196MC, MD, MH USER’S MANUAL

WG_OUTPUT (Waveform Generator) (Continued)	Address:	1FC0H
	Reset State:	0000H

The waveform generator output configuration (WG_OUTPUT) register controls the configuration of the waveform generator and PWM module pins. Both the waveform generator and the PWM module share pins with port 6. Having these control bits in a single register enables you to configure all port 6 pins with a single write to WG_OUTPUT.

15

OP1	OP0	SYNC	PE7
7
P7	P6	PH3.1	PH3.0

8

PE6	PH3.2	PH2.2	PH1.2
			0
PH2.1	PH2.0	PH1.1	PH1.0

Bit	Bit	Function
Number	Mnemonic
10	PH3.2	Phase 3 Function
		Selects either the port function or the waveform generator output
		function for pins P6.4/WG3# and P6.5/WG3.
		0 = P6.4, P6.5
		1 = WG3#, WG3
9	PH2.2	Phase 2 Function
		Selects either the port function or the waveform generator output
		function for pins P6.2/WG2# and P6.3/WG2.
		0 = P6.2, P6.3
		1 = WG2#, WG2
8	PH1.2	Phase 1 Function
		Selects either the port function or the waveform generator output
		function for pins P6.0/WG1# and P6.1/WG1.
		0 = P6.0, P6.1
		1 = WG1#, WG1
7	P7	P6.7/PWM1 Value
		Write the desired P6.7/PWM1 value to this bit.
6	P6	P6.6/PWM0 Value
		Write the desired P6.6/PWM0 value to this bit.
5:4	PH3.1:0	P6.4/WG3#, P6.5/WG3 Value
		Write the desired output values to these bits. See Table 9-5 on page
		9-12.
3:2	PH2.1:0	P6.2/WG2#, P6.3/WG2 Values
		Write the desired output values to these bits. See Table 9-5 on page
		9-12.
1:0	PH1.1:0	P6.0/WG1#, P6.1/WG1 Values
		Write the desired output values to these bits. See Table 9-5 on page
		9-12.

Figure 9-8. WG Output Configuration (WG_OUTPUT) Register (Continued)

9-14