Intel 8XC196MH, 8XC196MD, 8XC196MC manual Wgoutput Port, Reset State 0000H

		I/O PORTS
WG_OUTPUT (Port 6) (Continued)	Address:	1FC0H
	Reset State:	0000H

The port 6 output configuration (WG_OUTPUT) register controls port 6 functions. If you are using port 6 for general-purpose outputs, write C0H (for active-high outputs) or 00H (for active-low outputs) to the high byte of WG_OUTPUT, and write the desired pin values to the low byte. If you are using port 6 for waveform generator or PWM outputs, please refer to Chapter 9, “Waveform Generator” or Chapter 10, “Pulse-width Modulator” for a description of the WG_OUTPUT register functions.

15

OP1	OP0	—	M7
7
D7	D6	D5	D4

8

M6	M5:4	M3:2	M1:0
			0
D3	D2	D1	D0

Bit	Bit	Function
Number	Mnemonic
7:0	D7:0	Data
		In general-purpose output mode, these bits hold the values to be driven
		out on the pins. Write the desired values to these bits (bits 7:0
		correspond to pins P6.7:0).

Figure 6-5. Port 6 Output Configuration (WG_OUTPUT) Register (Continued)

6-19